Limited-time offer: Free sample kit with any quote request. Request Yours →

Why Your Paper Towel Dispensers Keep Jamming (It's Not the Dispenser)

The Question I've Answered a Dozen Times

Last quarter, a colleague stopped me in the hallway: "How do you open the toilet paper dispenser in the third-floor restroom? The roll keeps jamming."

I knew exactly which unit she meant. It's one of the surface-mounted models we inherited when I took over facility purchasing back in 2020. The release latch requires you to push up and slide left at the same time—something almost nobody figures out on the first try, and I say that as someone who didn't figure it out either.

I walked over, showed her, and went back to my desk. Then I pulled up our facilities ticket log and counted. That was the eleventh time this year someone had asked me the same question about the same dispenser.

That's when I stopped blaming the dispenser.

The Surface Problem Is Never the Whole Problem

For most of my first two years in this role, I treated dispenser issues as maintenance problems. A unit jams, we swap it or call the vendor. Someone can't figure out how to change a roll, I show them. Ticket closed, move on.

But the tickets kept coming. Different floors, different staff, same pattern. And it wasn't just toilet paper—paper towel dispensers were jamming too, especially the older manual models. The requests never quite went away, no matter how many times I demonstrated the latch.

When I finally sat down and mapped the actual causes, I found three issues. None of them were about the dispensers themselves.

Cause 1: We'd bought for price, not for consistency

When I took over purchasing, the office had 180 employees across two buildings and eleven suppliers. The facilities closets were a museum of well-intentioned but incompatible decisions: three different toilet paper dispensers, two makes of paper towel dispenser, and a stockpile of rolls that fit some units but not others.

My predecessor had done what a lot of us do early on: she bought whatever was cheapest when a unit broke, from whichever vendor answered the phone first. It made sense at the time. Budgets are real. But she wasn't buying dispensers—she was buying new training problems for every janitorial shift that rotated through.

In my first year, I made the classic rookie mistake of assuming a dispenser is a dispenser. I ordered a bulk pack of refills without checking the spindle diameter. They didn't fit. That's when I learned the difference between "compatible" and "works."

(Full transparency: I don't have hard data on how much of our ticket volume traces back to that era, since the log only goes back to 2021. Based on the patterns, my rough sense is somewhere around 40% of dispenser tickets were "how do I use this" rather than "this is broken.")

Cause 2: The manuals walked off a long time ago

The EnMotion paper towel dispenser manual—and I'm using that term because we have one, somewhere—was probably printed on paper and tucked into a binder that got recycled during the move to our current building. Same story with the instructions for the older manual towel dispensers.

This sounds trivial until you hire a new janitorial contractor. They show up to a set of units they've never touched, and there's no resource beyond "ask the office administrator." Which means the office administrator (me) becomes the de facto distributor of dispenser knowledge for a 180-person office.

Georgia-Pacific actually publishes manuals and product support online for most of their commercial dispensers, which I didn't know for the first two years. That's on me. But if you've ever tried to find the right PDF for the specific model in your building at 4:30 on a Friday, you know it's not as easy as it sounds.

Cause 3: The job grew without anyone noticing

Here's the part that took me longest to name: the office administrator role had quietly absorbed every unsolved problem in the building.

Last quarter alone, my team fielded requests for a foil shaver for the locker room, sound proofing panels for the conference room next to the HVAC closet, and three separate tickets asking how to force quit an unresponsive Windows program after a meeting laptop locked up.

None of those requests are unreasonable on their own. The problem is that they all landed on the same desk, with the same email inbox, with the same person who was already answering dispenser questions. Every new category of request made the same triage worse, and the dispenser was just the most visible symptom.

What It Actually Cost Us

I wish I had tracked this more carefully from the start. What I can say anecdotally is that dispenser-related friction was a real line item in my team's week, and it wasn't just my time.

  • Restocking errors: custodial staff were pulling the wrong refills because the closets weren't sorted by model. We ended up with three half-used boxes of rolls that fit nothing.
  • Restroom complaints: mostly "the paper towel won't come out," which almost always traced back to a partially jammed unit or a roll loaded the wrong way.
  • My own time: roughly an hour a week in Q3 2023, mostly walking between floors to demonstrate a latch.

There's one incident I still think about. In November 2023, an executive VP from out of town used the main-floor restroom before a client pitch. The toilet paper dispenser had been loaded incorrectly by a new contractor, and she couldn't get it open. She mentioned it to my director. Not in a nasty way—she was actually pretty gracious about it—but it landed as "the office isn't quite running." I lost about two days of trust over a paper roll.

The bigger cost was subtler. When staff can't open a dispenser without asking, they start folding that into their mental model of how facilities work. The building starts to feel like it's maintained by one person instead of a system. And that one person eventually takes a vacation.

What I Changed (And What I'd Do Differently)

Looking back, I should have started here on day one.

The fix wasn't a new dispensers-for-everything purchase. It was standardizing, documenting, and training:

  1. Standardize on two models. One toilet paper dispenser type across both buildings, one paper towel dispenser type. We went with Georgia-Pacific EnMotion units on the towel side—the touchless format was a clear win for hygiene, and the support documentation is actually findable once you know where to look. It cost more up front than the cheapest replacements. It cost far less over two years.
  2. Rebuild the manual binder—digitally. Every dispenser model now has a one-page PDF in a shared drive: how to open it, how to change the roll, how to reset it. I printed laminated cards for the janitorial closet too, because asking a contractor to check a shared drive on their phone between tasks is not a real plan.
  3. Train once, onboard always. Every new custodial contractor gets a 15-minute walkthrough on day one. I built it into their onboarding checklist. The number of "how do I open this" tickets dropped from eleven a year to two in the first six months.
  4. Push back on scope creep. I'm still the person who fields foil shaver and Windows force-quit questions, but I now route them: IT handles software, facilities handles hardware, and I handle the ordering. The building didn't get smaller. My role did.

The Honest Conclusion

I don't think any of this is unique to our office. Dispensers are a proxy for a broader procurement reality: the equipment you install becomes the training burden you carry, and the cheapest option at the moment of purchase is rarely the cheapest option at the moment of use.

If you're inheriting a facilities closet full of mixed models and missing manuals, you're not doing anything wrong. You're just doing what your predecessor didn't have time to fix. Start with the dispenser questions—the ones you're already answering—and build the system backward from there.

And if you're the person in the hallway asking how to open the toilet paper dispenser: I get it. It's the latch. Push up, slide left.

Share: WhatsApp LinkedIn Twitter
Emilia Novak avatar
Emilia Novak

Emilia Novak is a flooring and architectural-surfaces analyst covering ceramic and porcelain tile, natural stone, resilient flooring, underlayments, countertops, adhesives, grout, and installation accessories. She uses ASTM C373 and ASTM C648 test evidence while comparing water absorption, breaking strength, slab flatness, substrate moisture, joint width, slip resistance, and installed tolerances. Her specification guides help architects, contractors, and buyers match surface systems to traffic, wet-area exposure, maintenance demands, and substrate conditions.

Leave a Reply

Your email address will not be published. Required fields are marked *

Please enter your comment.
Name required.
Valid email required.